Table 7311 Warehouse Journal Line

Base Application, Microsoft.Warehouse.Journal

src/Layers/W1/BaseApp/Warehouse/Journal/WarehouseJournalLine.Table.al1,881 lines, Copyright (c) Microsoft Corporation. MIT

// ------------------------------------------------------------------------------------------------// Copyright (c) Microsoft Corporation. All rights reserved.// Licensed under the MIT License. See License.txt in the project root for license information.// ------------------------------------------------------------------------------------------------namespace Microsoft.Warehouse.Journal;using Microsoft.Foundation.AuditCodes;using Microsoft.Foundation.NoSeries;using Microsoft.Foundation.UOM;using Microsoft.Inventory.Counting.Journal;using Microsoft.Inventory.Counting.Tracking;using Microsoft.Inventory.Item;using Microsoft.Inventory.Ledger;using Microsoft.Inventory.Location;using Microsoft.Inventory.Tracking;using Microsoft.Warehouse.Activity;using Microsoft.Warehouse.Ledger;using Microsoft.Warehouse.Setup;using Microsoft.Warehouse.Structure;using Microsoft.Warehouse.Tracking;using Microsoft.Warehouse.Worksheet;using System.Security.AccessControl;table 7311 "Warehouse Journal Line"{    Caption = 'Warehouse Journal Line';    DrillDownPageID = "Warehouse Journal Lines";    LookupPageID = "Warehouse Journal Lines";    DataClassification = CustomerContent;    fields    {        field(1; "Journal Template Name"; Code[10])        {            Caption = 'Journal Template Name';            ToolTip = 'Specifies the name of the journal template, the basis of the journal batch, that the entries were posted from.';            TableRelation = "Warehouse Journal Template";        }        field(2; "Journal Batch Name"; Code[10])        {            Caption = 'Journal Batch Name';            ToolTip = 'Specifies the name of the journal batch, a personalized journal layout, that the entries were posted from.';            TableRelation = "Warehouse Journal Batch".Name where("Journal Template Name" = field("Journal Template Name"));        }        field(3; "Line No."; Integer)        {            Caption = 'Line No.';            ToolTip = 'Specifies the number of the warehouse journal line.';        }        field(4; "Registering Date"; Date)        {            Caption = 'Registering Date';            ToolTip = 'Specifies the date the line is registered.';        }        field(5; "Location Code"; Code[10])        {            Caption = 'Location Code';            ToolTip = 'Specifies the code of the location to which the journal line applies.';            TableRelation = Location;        }        field(6; "From Zone Code"; Code[10])        {            Caption = 'From Zone Code';            ToolTip = 'Specifies the code of the zone from which the item on the journal line is taken.';            TableRelation = Zone.Code where("Location Code" = field("Location Code"));            trigger OnValidate()            begin                if not PhysInvtEntered then                    TestField("Phys. Inventory", false);                if "From Zone Code" <> xRec."From Zone Code" then begin                    "From Bin Code" := '';                    "From Bin Type Code" := '';                end;            end;        }        field(7; "From Bin Code"; Code[20])        {            Caption = 'From Bin Code';            ToolTip = 'Specifies the code of the bin from which the item on the journal line is taken.';            TableRelation = if ("Phys. Inventory" = const(false),                                "Item No." = filter(''),                                "From Zone Code" = filter('')) "Bin Content"."Bin Code" where("Location Code" = field("Location Code"))            else            if ("Phys. Inventory" = const(false),                                         "Item No." = filter(<> ''),                                         "From Zone Code" = filter('')) "Bin Content"."Bin Code" where("Location Code" = field("Location Code"),                                                                                                      "Item No." = field("Item No."))            else            if ("Phys. Inventory" = const(false),                                                                                                               "Item No." = filter(''),                                                                                                               "From Zone Code" = filter(<> '')) "Bin Content"."Bin Code" where("Location Code" = field("Location Code"),                                                                                                                                                                              "Zone Code" = field("From Zone Code"))            else            if ("Phys. Inventory" = const(false),                                                                                                                                                                                       "Item No." = filter(<> ''),                                                                                                                                                                                       "From Zone Code" = filter(<> '')) "Bin Content"."Bin Code" where("Location Code" = field("Location Code"),                                                                                                                                                                                                                                                      "Item No." = field("Item No."),                                                                                                                                                                                                                                                      "Zone Code" = field("From Zone Code"))            else            if ("Phys. Inventory" = const(true),                                                                                                                                                                                                                                                               "From Zone Code" = filter('')) Bin.Code where("Location Code" = field("Location Code"))            else            if ("Phys. Inventory" = const(true),                                                                                                                                                                                                                                                                        "From Zone Code" = filter(<> '')) Bin.Code where("Location Code" = field("Location Code"),                                                                                                                                                                                                                                                                                                                       "Zone Code" = field("From Zone Code"));            trigger OnLookup()            begin                LookupFromBinCode();            end;            trigger OnValidate()            begin                if not PhysInvtEntered then                    TestField("Phys. Inventory", false);                if CurrFieldNo = FieldNo("From Bin Code") then                    if "From Bin Code" <> xRec."From Bin Code" then                        CheckBin("Location Code", "From Bin Code", false);                "From Bin Type Code" :=                  GetBinType("Location Code", "From Bin Code");                Bin.CalcFields("Adjustment Bin");                if Bin."Adjustment Bin" and ("Entry Type" <> "Entry Type"::"Positive Adjmt.") then                    Bin.FieldError("Adjustment Bin");                if "From Bin Code" <> '' then                    "From Zone Code" := Bin."Zone Code";                if "Entry Type" = "Entry Type"::"Negative Adjmt." then                    SetUpAdjustmentBin();            end;        }        field(8; Description; Text[100])        {            Caption = 'Description';            ToolTip = 'Specifies the description of the item.';        }        field(9; "Item No."; Code[20])        {            Caption = 'Item No.';            ToolTip = 'Specifies the number of the item on the journal line.';            TableRelation = Item where(Type = const(Inventory));            trigger OnValidate()            begin                if not PhysInvtEntered then                    TestField("Phys. Inventory", false);                if "Item No." <> xRec."Item No." then                    DeleteWhseItemTracking();                SetItemFields();            end;        }        field(10; Quantity; Decimal)        {            AutoFormatType = 0;            Caption = 'Quantity';            ToolTip = 'Specifies the number of units of the item in the adjustment (positive or negative) or the reclassification.';            DecimalPlaces = 0 : 5;            trigger OnValidate()            var                WhseItemTrackingSetup: Record "Item Tracking Setup";                IsHandled: Boolean;            begin                if not PhysInvtEntered then                    TestField("Phys. Inventory", false);                IsHandled := false;                OnValidateQuantityOnBeforeGetWhseJnlTemplate(Rec, IsHandled);                if not IsHandled then begin                    WhseJnlTemplate.Get("Journal Template Name");                    if WhseJnlTemplate.Type = WhseJnlTemplate.Type::Reclassification then begin                        if Quantity < 0 then                            FieldError(Quantity, Text000);                    end else begin                        GetLocation("Location Code");                        Location.TestField("Adjustment Bin Code");                    end;                end;                Quantity := UOMMgt.RoundAndValidateQty(Quantity, "Qty. Rounding Precision", FieldCaption(Quantity));                "Qty. (Base)" := CalcBaseQty(Quantity, FieldCaption(Quantity), FieldCaption("Qty. (Base)"));                OnValidateQuantityOnAfterCalcBaseQty(Rec, xRec);                "Qty. (Absolute)" := Abs(Quantity);                "Qty. (Absolute, Base)" := Abs("Qty. (Base)");                if (xRec.Quantity < 0) and (Quantity >= 0) or                   (xRec.Quantity >= 0) and (Quantity < 0)                then                    ExchangeFromToBin();                if Quantity > 0 then                    WMSMgt.CalcCubageAndWeight(                      "Item No.", "Unit of Measure Code", "Qty. (Absolute)", Cubage, Weight)                else begin                    Cubage := 0;                    Weight := 0;                end;                if Quantity <> xRec.Quantity then begin                    CheckBin("Location Code", "From Bin Code", false);                    CheckBin("Location Code", "To Bin Code", true);                end;                ItemTrackingMgt.GetWhseItemTrkgSetup("Item No.", WhseItemTrackingSetup);                if WhseItemTrackingSetup."Serial No. Required" and not "Phys. Inventory" and ("Serial No." <> '') then                    CheckSerialNoTrackedQuantity();            end;        }        field(11; "Qty. (Base)"; Decimal)        {            AutoFormatType = 0;            Caption = 'Qty. (Base)';            DecimalPlaces = 0 : 5;            trigger OnValidate()            var                IsHandled: Boolean;            begin                IsHandled := false;                OnBeforeValidateQtyBase(Rec, xRec, CurrFieldNo, IsHandled);                if IsHandled then                    exit;                TestField("Qty. per Unit of Measure", 1);                Validate(Quantity, "Qty. (Base)");            end;        }        field(12; "Qty. (Absolute)"; Decimal)        {            AutoFormatType = 0;            Caption = 'Qty. (Absolute)';            DecimalPlaces = 0 : 5;            trigger OnValidate()            begin                if not PhysInvtEntered then                    TestField("Phys. Inventory", false);                "Qty. (Absolute, Base)" :=                    CalcBaseQty("Qty. (Absolute)", FieldCaption("Qty. (Absolute)"), FieldCaption("Qty. (Absolute, Base)"));                if Quantity > 0 then                    WMSMgt.CalcCubageAndWeight(                      "Item No.", "Unit of Measure Code", "Qty. (Absolute)", Cubage, Weight)                else begin                    Cubage := 0;                    Weight := 0;                end;            end;        }        field(13; "Qty. (Absolute, Base)"; Decimal)        {            AutoFormatType = 0;            Caption = 'Qty. (Absolute, Base)';            DecimalPlaces = 0 : 5;            trigger OnValidate()            var                NewValue: Decimal;            begin                NewValue := Round("Qty. (Absolute, Base)", UOMMgt.QtyRndPrecision());                Validate(Quantity, CalcQty("Qty. (Absolute, Base)") * Quantity / Abs(Quantity));                // Take care of rounding issues                "Qty. (Absolute, Base)" := NewValue;                "Qty. (Base)" := NewValue * "Qty. (Base)" / Abs("Qty. (Base)");            end;        }        field(14; "Zone Code"; Code[10])        {            Caption = 'Zone Code';            ToolTip = 'Specifies the zone code where the bin on this line is located.';            TableRelation = Zone.Code where("Location Code" = field("Location Code"));            trigger OnValidate()            begin                if not PhysInvtEntered then                    TestField("Phys. Inventory", false);                if "Zone Code" <> xRec."Zone Code" then                    "Bin Code" := '';                if Quantity < 0 then                    Validate("From Zone Code", "Zone Code")                else                    Validate("To Zone Code", "Zone Code");            end;        }        field(15; "Bin Code"; Code[20])        {            Caption = 'Bin Code';            ToolTip = 'Specifies the bin where the items are picked or put away.';            TableRelation = if ("Zone Code" = filter('')) Bin.Code where("Location Code" = field("Location Code"))            else            if ("Zone Code" = filter(<> '')) Bin.Code where("Location Code" = field("Location Code"),                                                                               "Zone Code" = field("Zone Code"));            trigger OnLookup()            begin                LookupBinCode();            end;            trigger OnValidate()            begin                if not PhysInvtEntered then                    TestField("Phys. Inventory", false);                if Quantity < 0 then begin                    Validate("From Bin Code", "Bin Code");                    if "Bin Code" <> xRec."Bin Code" then                        CheckBin("Location Code", "Bin Code", false);                end else begin                    Validate("To Bin Code", "Bin Code");                    if "Bin Code" <> xRec."Bin Code" then                        CheckBin("Location Code", "Bin Code", true);                end;                if "Bin Code" <> '' then begin                    GetBin("Location Code", "Bin Code");                    "Zone Code" := Bin."Zone Code";                end;            end;        }        field(20; "Source Type"; Integer)        {            Caption = 'Source Type';            Editable = false;        }        field(21; "Source Subtype"; Option)        {            Caption = 'Source Subtype';            Editable = false;            OptionCaption = '0,1,2,3,4,5,6,7,8,9,10';            OptionMembers = "0","1","2","3","4","5","6","7","8","9","10";        }        field(22; "Source No."; Code[20])        {            Caption = 'Source No.';            Editable = false;        }        field(23; "Source Line No."; Integer)        {            BlankZero = true;            Caption = 'Source Line No.';            Editable = false;        }        field(24; "Source Subline No."; Integer)        {            BlankZero = true;            Caption = 'Source Subline No.';            Editable = false;        }        field(25; "Source Document"; Enum "Warehouse Journal Source Document")        {            BlankZero = true;            Caption = 'Source Document';            Editable = false;        }        field(26; "Source Code"; Code[10])        {            Caption = 'Source Code';            Editable = false;            TableRelation = "Source Code";        }        field(27; "To Zone Code"; Code[10])        {            Caption = 'To Zone Code';            ToolTip = 'Specifies the code of the zone to which the item on the journal line will be moved.';            TableRelation = Zone.Code where("Location Code" = field("Location Code"));            trigger OnValidate()            begin                if not PhysInvtEntered then                    TestField("Phys. Inventory", false);                if "To Zone Code" <> xRec."To Zone Code" then                    "To Bin Code" := '';            end;        }        field(28; "To Bin Code"; Code[20])        {            Caption = 'To Bin Code';            ToolTip = 'Specifies the code of the bin to which the item on the journal line will be moved.';            TableRelation = if ("To Zone Code" = filter('')) Bin.Code where("Location Code" = field("Location Code"))            else            if ("To Zone Code" = filter(<> '')) Bin.Code where("Location Code" = field("Location Code"),                                                                                  "Zone Code" = field("To Zone Code"));            trigger OnValidate()            begin                if not PhysInvtEntered then                    TestField("Phys. Inventory", false);                if CurrFieldNo = FieldNo("To Bin Code") then                    if "To Bin Code" <> xRec."To Bin Code" then                        CheckBin("Location Code", "To Bin Code", true);                GetBin("Location Code", "To Bin Code");                Bin.CalcFields("Adjustment Bin");                if Bin."Adjustment Bin" and ("Entry Type" <> "Entry Type"::"Negative Adjmt.") then                    Bin.FieldError("Adjustment Bin");                OnValidateToBinCodeOnBeforeSetToZoneCode(Rec, Bin);                if "To Bin Code" <> '' then                    "To Zone Code" := Bin."Zone Code";                if "Entry Type" = "Entry Type"::"Positive Adjmt." then                    SetUpAdjustmentBin();            end;        }        field(29; "Reason Code"; Code[10])        {            Caption = 'Reason Code';            ToolTip = 'Specifies the reason code for the warehouse journal line.';            TableRelation = "Reason Code";        }        field(33; "Registering No. Series"; Code[20])        {            Caption = 'Registering No. Series';            TableRelation = "No. Series";        }        field(35; "From Bin Type Code"; Code[10])        {            Caption = 'From Bin Type Code';            TableRelation = "Bin Type";        }        field(40; Cubage; Decimal)        {            AutoFormatType = 0;            Caption = 'Cubage';            ToolTip = 'Specifies the total cubage of the items on the warehouse journal line.';            DecimalPlaces = 0 : 5;            Editable = false;        }        field(41; Weight; Decimal)        {            AutoFormatType = 0;            Caption = 'Weight';            ToolTip = 'Specifies the weight of one item unit when measured in the specified unit of measure.';            DecimalPlaces = 0 : 5;            Editable = false;        }        field(50; "Whse. Document No."; Code[20])        {            Caption = 'Whse. Document No.';            ToolTip = 'Specifies the warehouse document number of the journal line.';        }        field(51; "Whse. Document Type"; Enum "Warehouse Journal Document Type")        {            Caption = 'Whse. Document Type';        }        field(52; "Whse. Document Line No."; Integer)        {            BlankZero = true;            Caption = 'Whse. Document Line No.';        }        field(53; "Qty. (Calculated)"; Decimal)        {            AutoFormatType = 0;            Caption = 'Qty. (Calculated)';            DecimalPlaces = 0 : 5;            Editable = false;            trigger OnValidate()            begin                Validate("Qty. (Phys. Inventory)");            end;        }        field(54; "Qty. (Phys. Inventory)"; Decimal)        {            AutoFormatType = 0;            Caption = 'Qty. (Phys. Inventory)';            DecimalPlaces = 0 : 5;            trigger OnValidate()            begin                TestField("Phys. Inventory", true);                CheckQtyPhysInventory();                PhysInvtEntered := true;                Quantity := 0;                Validate(Quantity, "Qty. (Phys. Inventory)" - "Qty. (Calculated)");                if "Qty. (Phys. Inventory)" = "Qty. (Calculated)" then                    Validate("Qty. (Phys. Inventory) (Base)", "Qty. (Calculated) (Base)")                else                    Validate("Qty. (Phys. Inventory) (Base)", Round("Qty. (Phys. Inventory)" * "Qty. per Unit of Measure", UOMMgt.QtyRndPrecision()));                PhysInvtEntered := false;            end;        }        field(55; "Entry Type"; Option)        {            Caption = 'Entry Type';            ToolTip = 'Specifies the type of transaction that will be registered from the line.';            OptionCaption = 'Negative Adjmt.,Positive Adjmt.,Movement';            OptionMembers = "Negative Adjmt.","Positive Adjmt.",Movement;        }        field(56; "Phys. Inventory"; Boolean)        {            Caption = 'Phys. Inventory';            Editable = false;        }        field(60; "Reference Document"; Enum "Whse. Reference Document Type")        {            Caption = 'Reference Document';        }        field(61; "Reference No."; Code[20])        {            Caption = 'Reference No.';        }        field(67; "User ID"; Code[50])        {            Caption = 'User ID';            ToolTip = 'Specifies the ID of the user who posted the entry, to be used, for example, in the change log.';            DataClassification = EndUserIdentifiableInformation;            TableRelation = User."User Name";        }        field(68; "Qty. (Calculated) (Base)"; Decimal)        {            AutoFormatType = 0;            Caption = 'Qty. (Calculated) (Base)';            DecimalPlaces = 0 : 5;            Editable = false;        }        field(69; "Qty. (Phys. Inventory) (Base)"; Decimal)        {            AutoFormatType = 0;            Caption = 'Qty. (Phys. Inventory) (Base)';            DecimalPlaces = 0 : 5;            trigger OnValidate()            begin                "Qty. (Base)" := "Qty. (Phys. Inventory) (Base)" - "Qty. (Calculated) (Base)";                "Qty. (Absolute, Base)" := Abs("Qty. (Base)");                OnAfterValidateQtyPhysInventoryBase(Rec, PhysInvtEntered);            end;        }        field(5402; "Variant Code"; Code[10])        {            Caption = 'Variant Code';            ToolTip = 'Specifies the variant of the item on the line.';            TableRelation = "Item Variant".Code where("Item No." = field("Item No."));            trigger OnValidate()            var                ItemVariant: Record "Item Variant";            begin                if not PhysInvtEntered then                    TestField("Phys. Inventory", false);                if "Variant Code" <> '' then begin                    ItemVariant.Get("Item No.", "Variant Code");                    Description := ItemVariant.Description;                end else                    GetItem("Item No.", Description);                if "Variant Code" <> xRec."Variant Code" then begin                    DeleteWhseItemTracking();                    CheckBin("Location Code", "From Bin Code", false);                    CheckBin("Location Code", "To Bin Code", true);                end;            end;        }        field(5404; "Qty. per Unit of Measure"; Decimal)        {            AutoFormatType = 0;            Caption = 'Qty. per Unit of Measure';            ToolTip = 'Specifies the number of base units of measure in the unit of measure specified for the item on the journal line.';            DecimalPlaces = 0 : 5;            Editable = false;            InitValue = 1;        }        field(5407; "Unit of Measure Code"; Code[10])        {            Caption = 'Unit of Measure Code';            ToolTip = 'Specifies how each unit of the item or resource is measured, such as in pieces or hours. By default, the value in the Base Unit of Measure field on the item or resource card is inserted.';            TableRelation = "Item Unit of Measure".Code where("Item No." = field("Item No."));            trigger OnValidate()            var                IsHandled: Boolean;            begin                if not PhysInvtEntered then                    TestField("Phys. Inventory", false);                if "Unit of Measure Code" <> xRec."Unit of Measure Code" then                    DeleteWhseItemTracking();                if "Item No." <> '' then begin                    TestField("Unit of Measure Code");                    GetItemUnitOfMeasure();                    "Qty. per Unit of Measure" := ItemUnitOfMeasure."Qty. per Unit of Measure";                    "Qty. Rounding Precision" := UOMMgt.GetQtyRoundingPrecision(Item, "Unit of Measure Code");                    "Qty. Rounding Precision (Base)" := UOMMgt.GetQtyRoundingPrecision(Item, Item."Base Unit of Measure");                    CheckBin("Location Code", "From Bin Code", false);                    CheckBin("Location Code", "To Bin Code", true);                end else                    "Qty. per Unit of Measure" := 1;                IsHandled := false;                OnValidateUnitOfMeasureCodeOnBeforeValidateQuantity(Rec, IsHandled);                if not IsHandled then                    Validate(Quantity);            end;        }        field(5408; "Qty. Rounding Precision"; Decimal)        {            AutoFormatType = 0;            Caption = 'Qty. Rounding Precision';            InitValue = 0;            DecimalPlaces = 0 : 5;            MinValue = 0;            MaxValue = 1;            Editable = false;        }        field(5409; "Qty. Rounding Precision (Base)"; Decimal)        {            AutoFormatType = 0;            Caption = 'Qty. Rounding Precision (Base)';            InitValue = 0;            DecimalPlaces = 0 : 5;            MinValue = 0;            MaxValue = 1;            Editable = false;        }        field(6500; "Serial No."; Code[50])        {            Caption = 'Serial No.';            ToolTip = 'Specifies the same as for the field in the Item Journal window.';            trigger OnLookup()            begin                ItemTrackingMgt.LookupTrackingNoInfo("Item No.", "Variant Code", ItemTrackingType::"Serial No.", "Serial No.");            end;            trigger OnValidate()            begin                if "Serial No." <> '' then begin                    ItemTrackingMgt.CheckWhseItemTrkgSetup("Item No.");                    InitExpirationDate();                end;                CheckSerialNoTrackedQuantity();            end;        }        field(6501; "Lot No."; Code[50])        {            Caption = 'Lot No.';            ToolTip = 'Specifies the same as for the field in the Item Journal window.';            trigger OnLookup()            begin                ItemTrackingMgt.LookupTrackingNoInfo("Item No.", "Variant Code", ItemTrackingType::"Lot No.", "Lot No.");            end;            trigger OnValidate()            begin                if "Lot No." <> '' then begin                    ItemTrackingMgt.CheckWhseItemTrkgSetup("Item No.");                    InitExpirationDate();                end;            end;        }        field(6502; "Warranty Date"; Date)        {            Caption = 'Warranty Date';            ToolTip = 'Specifies the last day of warranty for the item on the line.';        }        field(6503; "Expiration Date"; Date)        {            Caption = 'Expiration Date';            ToolTip = 'Specifies the last date that the item on the line can be used.';            trigger OnValidate()            begin                CheckLotNoTrackedExpirationDate();            end;        }        field(6504; "New Serial No."; Code[50])        {            Caption = 'New Serial No.';        }        field(6505; "New Lot No."; Code[50])        {            Caption = 'New Lot No.';        }        field(6506; "New Expiration Date"; Date)        {            Caption = 'New Expiration Date';        }        field(6515; "Package No."; Code[50])        {            Caption = 'Package No.';            ToolTip = 'Specifies the same as for the field in the Item Journal window.';            CaptionClass = '6,1';            trigger OnLookup()            begin                ItemTrackingMgt.LookupTrackingNoInfo("Item No.", "Variant Code", Enum::"Item Tracking Type"::"Package No.", "Package No.");            end;            trigger OnValidate()            begin                if "Package No." <> '' then begin                    ItemTrackingMgt.CheckWhseItemTrkgSetup("Item No.");                    InitExpirationDate();                end;            end;        }        field(6516; "New Package No."; Code[50])        {            Caption = 'New Package No.';            CaptionClass = '6,2';        }        field(7380; "Phys Invt Counting Period Code"; Code[10])        {            Caption = 'Phys Invt Counting Period Code';            ToolTip = 'Specifies a code for the physical inventory counting period, if the counting period functionality was used when the line was created.';            Editable = false;            TableRelation = "Phys. Invt. Counting Period";        }        field(7381; "Phys Invt Counting Period Type"; Option)        {            AccessByPermission = TableData "Phys. Invt. Item Selection" = R;            Caption = 'Phys Invt Counting Period Type';            ToolTip = 'Specifies whether the physical inventory counting period was assigned to a stockkeeping unit or an item.';            Editable = false;            OptionCaption = ' ,Item,SKU';            OptionMembers = " ",Item,SKU;        }    }    keys    {        key(Key1; "Journal Template Name", "Journal Batch Name", "Location Code", "Line No.")        {            Clustered = true;        }        key(Key2; "Item No.", "Location Code", "Entry Type", "From Bin Type Code", "Variant Code", "Unit of Measure Code")        {            IncludedFields = "Qty. (Absolute, Base)";        }#pragma warning disable AS0009        key(Key3; "Item No.", "From Bin Code", "Location Code", "Entry Type", "Variant Code", "Unit of Measure Code", "Lot No.", "Serial No.", "Package No.")#pragma warning restore AS0009        {            IncludedFields = "Qty. (Absolute, Base)", "Qty. (Absolute)", Cubage, Weight;        }#pragma warning disable AS0009        key(Key4; "Item No.", "To Bin Code", "Location Code", "Variant Code", "Unit of Measure Code", "Lot No.", "Serial No.", "Package No.")#pragma warning restore AS0009        {            IncludedFields = "Qty. (Absolute, Base)", "Qty. (Absolute)";        }        key(Key5; "To Bin Code", "Location Code")        {            IncludedFields = Cubage, Weight, "Qty. (Absolute)";        }        key(Key6; "Location Code", "Item No.", "Variant Code")        {        }        key(Key7; "Location Code", "Bin Code", "Item No.", "Variant Code")        {        }    }    fieldgroups    {        fieldgroup(Brick; "Item No.", Description, Quantity, "Whse. Document No.", "Registering Date")        { }    }    trigger OnDelete()    begin        DeleteWhseItemTracking();    end;    trigger OnInsert()    begin        "User ID" := CopyStr(UserId(), 1, MaxStrLen("User ID"));    end;    trigger OnModify()    begin        if "User ID" = '' then            "User ID" := CopyStr(UserId(), 1, MaxStrLen("User ID"));    end;    var        Location: Record Location;        Bin: Record Bin;        WhseJnlTemplate: Record "Warehouse Journal Template";        WhseJnlBatch: Record "Warehouse Journal Batch";        ItemUnitOfMeasure: Record "Item Unit of Measure";        WMSMgt: Codeunit "WMS Management";        ItemTrackingMgt: Codeunit "Item Tracking Management";        UOMMgt: Codeunit "Unit of Measure Management";        ItemTrackingType: Enum "Item Tracking Type";        OldItemNo: Code[20];#pragma warning disable AA0074        Text000: Label 'must not be negative';#pragma warning disable AA0470        Text001: Label '%1 Journal';#pragma warning restore AA0470        Text002: Label 'DEFAULT';        Text003: Label 'Default Journal';#pragma warning disable AA0470        Text005: Label 'The location %1 of warehouse journal batch %2 is not enabled for user %3.';        Text006: Label '%1 must be 0 or 1 for an Item tracked by Serial Number.';#pragma warning restore AA0470#pragma warning restore AA0074        ItemTrackedItemErr: Label '%1 must not change for tracked item.', Comment = '%1 = Field Caption';        OpenFromBatch: Boolean;        StockProposal: Boolean;    protected var        Item: Record Item;        WhseJnlLine: Record "Warehouse Journal Line";        PhysInvtEntered: Boolean;    procedure GetItem(ItemNo: Code[20]; var ItemDescription: Text[100])    begin        if ItemNo <> OldItemNo then begin            ItemDescription := '';            if ItemNo <> '' then                if Item.Get(ItemNo) then                    ItemDescription := Item.Description;            OldItemNo := ItemNo;        end else            ItemDescription := Item.Description;    end;    procedure SetUpNewLine(LastWhseJnlLine: Record "Warehouse Journal Line")    var        NoSeries: Codeunit "No. Series";    begin        WhseJnlTemplate.Get("Journal Template Name");        WhseJnlLine.SetRange("Journal Template Name", "Journal Template Name");        WhseJnlLine.SetRange("Journal Batch Name", "Journal Batch Name");        WhseJnlLine.SetRange("Location Code", "Location Code");        OnSetUpNewLineOnAfterWhseJnlLineSetFilters(Rec, WhseJnlLine, LastWhseJnlLine);        if WhseJnlLine.FindFirst() then begin            WhseJnlBatch.Get(              "Journal Template Name", "Journal Batch Name", "Location Code");            "Registering Date" := LastWhseJnlLine."Registering Date";            "Whse. Document No." := LastWhseJnlLine."Whse. Document No.";            "Entry Type" := LastWhseJnlLine."Entry Type";        end else begin            "Registering Date" := WorkDate();            GetWhseJnlBatch();            if WhseJnlBatch."No. Series" <> '' then                "Whse. Document No." := NoSeries.PeekNextNo(WhseJnlBatch."No. Series", "Registering Date");        end;        if WhseJnlTemplate.Type = WhseJnlTemplate.Type::"Physical Inventory" then begin            "Source Document" := "Source Document"::"Phys. Invt. Jnl.";            "Whse. Document Type" := "Whse. Document Type"::"Whse. Phys. Inventory";        end;        "Source Code" := WhseJnlTemplate."Source Code";        "Reason Code" := WhseJnlBatch."Reason Code";        "Registering No. Series" := WhseJnlBatch."Registering No. Series";        if WhseJnlTemplate.Type <> WhseJnlTemplate.Type::Reclassification then begin            if Quantity >= 0 then                "Entry Type" := "Entry Type"::"Positive Adjmt."            else                "Entry Type" := "Entry Type"::"Negative Adjmt.";            SetUpAdjustmentBin();        end else            "Entry Type" := "Entry Type"::Movement;        OnAfterSetupNewLine(Rec, LastWhseJnlLine, WhseJnlTemplate);    end;    local procedure GetWhseJnlBatch()    var        IsHandled: Boolean;    begin        IsHandled := false;        OnBeforeGetWhseJnlBatch(Rec, WhseJnlBatch, IsHandled);        if IsHandled then            exit;        WhseJnlBatch.Get("Journal Template Name", "Journal Batch Name", "Location Code");    end;    procedure SetUpAdjustmentBin()    var        Location: Record Location;    begin        WhseJnlTemplate.Get("Journal Template Name");        if WhseJnlTemplate.Type = WhseJnlTemplate.Type::Reclassification then            exit;        Location.Get("Location Code");        GetBin(Location.Code, Location."Adjustment Bin Code");        case "Entry Type" of            "Entry Type"::"Positive Adjmt.":                begin                    "From Zone Code" := Bin."Zone Code";                    "From Bin Code" := Bin.Code;                    "From Bin Type Code" := Bin."Bin Type Code";                end;            "Entry Type"::"Negative Adjmt.":                begin                    "To Zone Code" := Bin."Zone Code";                    "To Bin Code" := Bin.Code;                end;        end;    end;    local procedure CalcQty(QtyBase: Decimal): Decimal    begin        TestField("Qty. per Unit of Measure");        exit(Round(QtyBase / "Qty. per Unit of Measure", UOMMgt.QtyRndPrecision()));    end;    local procedure CalcBaseQty(Qty: Decimal; FromFieldName: Text; ToFieldName: Text): Decimal    begin        OnBeforeCalcBaseQty(Rec, Qty, FromFieldName, ToFieldName);        exit(UOMMgt.CalcBaseQty(            "Item No.", "Variant Code", "Unit of Measure Code", Qty, "Qty. per Unit of Measure", "Qty. Rounding Precision (Base)", FieldCaption("Qty. Rounding Precision"), FromFieldName, ToFieldName));    end;    procedure CalcReservEntryQuantity(): Decimal    var        ReservEntry: Record "Reservation Entry";    begin        if "Source Type" = ProdOrderComponentSourceID() then begin            ReservEntry.SetSourceFilter("Source Type", "Source Subtype", "Journal Template Name", "Source Subline No.", true);            ReservEntry.SetSourceFilter("Journal Batch Name", "Source Line No.");        end else begin            ReservEntry.SetSourceFilter("Source Type", "Source Subtype", "Journal Template Name", "Source Line No.", true);            ReservEntry.SetSourceFilter("Journal Batch Name", 0);        end;        ReservEntry.SetTrackingFilterFromWhseJnlLine(WhseJnlLine);        if ReservEntry.FindFirst() then            exit(ReservEntry."Quantity (Base)");        exit("Qty. (Base)");    end;    local procedure ProdOrderComponentSourceID(): Integer    begin        exit(5407);    end;    local procedure GetItemUnitOfMeasure()    begin        GetItem("Item No.", Description);        if (Item."No." <> ItemUnitOfMeasure."Item No.") or           ("Unit of Measure Code" <> ItemUnitOfMeasure.Code)        then            if not ItemUnitOfMeasure.Get(Item."No.", "Unit of Measure Code") then                ItemUnitOfMeasure.Get(Item."No.", Item."Base Unit of Measure");    end;    local procedure SetItemFields()    var        IsHandled: Boolean;    begin        IsHandled := false;        OnBeforeSetItemFields(Rec, IsHandled, xRec, Item);        if IsHandled then            exit;        if "Item No." <> '' then begin            if "Item No." <> xRec."Item No." then                "Variant Code" := '';            GetItemUnitOfMeasure();            Description := Item.Description;            Validate("Unit of Measure Code", ItemUnitOfMeasure.Code);        end else begin            Description := '';            "Variant Code" := '';            Validate("Unit of Measure Code", '');        end;    end;    procedure EmptyLine(): Boolean    begin        exit(          ("Item No." = '') and (Quantity = 0));    end;    local procedure ExchangeFromToBin()    var        WhseJnlLine: Record "Warehouse Journal Line";    begin        GetLocation("Location Code");        WhseJnlLine := Rec;        "From Zone Code" := WhseJnlLine."To Zone Code";        "From Bin Code" := WhseJnlLine."To Bin Code";        "From Bin Type Code" :=          GetBinType("Location Code", "From Bin Code");        if ("Location Code" = Location.Code) and           ("From Bin Code" = Location."Adjustment Bin Code")        then            WMSMgt.CheckAdjmtBin(Location, "Qty. (Absolute)", Quantity > 0);        "To Zone Code" := WhseJnlLine."From Zone Code";        "To Bin Code" := WhseJnlLine."From Bin Code";        if ("Location Code" = Location.Code) and           ("To Bin Code" = Location."Adjustment Bin Code")        then            WMSMgt.CheckAdjmtBin(Location, "Qty. (Absolute)", Quantity > 0);        if WhseJnlTemplate.Type <> WhseJnlTemplate.Type::Reclassification then begin            if Quantity >= 0 then                "Entry Type" := "Entry Type"::"Positive Adjmt."            else                "Entry Type" := "Entry Type"::"Negative Adjmt.";            SetUpAdjustmentBin();        end;    end;    local procedure GetLocation(LocationCode: Code[10])    var        IsHandled: Boolean;    begin        IsHandled := false;        OnBeforeGetLocation(Location, LocationCode, IsHandled);        if IsHandled then            exit;        if Location.Code <> LocationCode then            Location.Get(LocationCode);    end;    local procedure GetBin(LocationCode: Code[10]; BinCode: Code[20])    begin        if (LocationCode = '') or (BinCode = '') then            Clear(Bin)        else            if (Bin."Location Code" <> LocationCode) or               (Bin.Code <> BinCode)            then                Bin.Get(LocationCode, BinCode);    end;    internal procedure CheckBin(CalledByPosting: Boolean)    begin        if Rec."Location Code" = '' then            exit;        GetLocation(Rec."Location Code");        if not Location."Bin Mandatory" then            exit;        if Rec."To Bin Code" = '' then            exit;        CheckBin("Location Code", "To Bin Code", true, CalledByPosting);    end;    local procedure CheckBin(LocationCode: Code[10]; BinCode: Code[20]; Inbound: Boolean)    begin        CheckBin(LocationCode, BinCode, Inbound, false);    end;    local procedure CheckBin(LocationCode: Code[10]; BinCode: Code[20]; Inbound: Boolean; CalledByPosting: Boolean)    var        BinContent: Record "Bin Content";        WarehouseJournalLine: Record "Warehouse Journal Line";        IsHandled: Boolean;    begin        IsHandled := false;        OnBeforeCheckBin(Rec, LocationCode, BinCode, Inbound, IsHandled, CurrFieldNo);        if IsHandled then            exit;        if (BinCode <> '') and ("Item No." <> '') then begin            GetLocation(LocationCode);            if BinCode = Location."Adjustment Bin Code" then                exit;            BinContent.SetProposalMode(StockProposal);            if Inbound then begin                if Location."Directed Put-away and Pick" then                    GetBinType(LocationCode, BinCode);                if Location."Bin Capacity Policy" in                   [Location."Bin Capacity Policy"::"Allow More Than Max. Capacity",                    Location."Bin Capacity Policy"::"Prohibit More Than Max. Cap."]                then begin                    WarehouseJournalLine.SetCurrentKey("To Bin Code", "Location Code");                    WarehouseJournalLine.SetRange("To Bin Code", BinCode);                    WarehouseJournalLine.SetRange("Location Code", LocationCode);                    WarehouseJournalLine.SetRange("Journal Template Name", "Journal Template Name");                    WarehouseJournalLine.SetRange("Journal Batch Name", "Journal Batch Name");                    WarehouseJournalLine.SetRange("Line No.", "Line No.");                    WarehouseJournalLine.CalcSums("Qty. (Absolute)", Cubage, Weight);                end;                CheckIncreaseBin(BinContent, LocationCode, BinCode, CalledByPosting);            end else begin                IsHandled := false;                OnCheckBinOnBeforeCheckOutboundBin(Rec, IsHandled);                if not IsHandled then begin                    BinContent.Get("Location Code", BinCode, "Item No.", "Variant Code", "Unit of Measure Code");                    if BinContent."Block Movement" in [                                                    BinContent."Block Movement"::Outbound, BinContent."Block Movement"::All]                    then                        if not StockProposal then                            BinContent.FieldError("Block Movement");                end;            end;            BinContent.SetProposalMode(false);        end;    end;    local procedure CheckIncreaseBin(BinContent: Record "Bin Content"; LocationCode: Code[10]; BinCode: Code[20]; CalledByPosting: Boolean)    var        IsHandled: Boolean;    begin        IsHandled := false;        OnBeforeCheckIncreaseBin(Rec, BinCode, StockProposal, IsHandled);        if IsHandled then            exit;        if BinContent.Get(             "Location Code", BinCode, "Item No.", "Variant Code", "Unit of Measure Code")        then            BinContent.CheckIncreaseBinContent(              "Qty. (Absolute, Base)", WhseJnlLine."Qty. (Absolute, Base)",              WhseJnlLine.Cubage, WhseJnlLine.Weight, Cubage, Weight, CalledByPosting, false)        else begin            GetBin(LocationCode, BinCode);            Bin.CheckIncreaseBin(              BinCode, "Item No.", "Qty. (Absolute)",              WhseJnlLine.Cubage, WhseJnlLine.Weight, Cubage, Weight, CalledByPosting, false);        end;    end;    procedure GetBinType(LocationCode: Code[10]; BinCode: Code[20]) BinTypeCode: Code[10]    var        BinType: Record "Bin Type";        IsHandled: Boolean;    begin        OnBeforeGetBinType(LocationCode, BinCode, BinTypeCode, IsHandled);        if IsHandled then            exit(BinTypeCode);        GetBin(LocationCode, BinCode);        WhseJnlTemplate.Get("Journal Template Name");        if WhseJnlTemplate.Type = WhseJnlTemplate.Type::Reclassification then            if Bin."Bin Type Code" <> '' then                if BinType.Get(Bin."Bin Type Code") then                    BinType.TestField(Receive, false);        exit(Bin."Bin Type Code");    end;    procedure TemplateSelection(PageID: Integer; PageTemplate: Enum "Warehouse Journal Template Type"; var WhseJnlLine: Record "Warehouse Journal Line") JnlSelected: Boolean    var        WhseJnlTemplate: Record "Warehouse Journal Template";    begin        JnlSelected := true;        WhseJnlTemplate.Reset();        if not OpenFromBatch then            WhseJnlTemplate.SetRange("Page ID", PageID);        WhseJnlTemplate.SetRange(Type, PageTemplate);        OnTemplateSelectionOnAfterSetFilters(Rec, WhseJnlTemplate, OpenFromBatch);        case WhseJnlTemplate.Count of            0:                begin                    WhseJnlTemplate.Init();                    WhseJnlTemplate.Validate(Type, PageTemplate);                    WhseJnlTemplate.Validate("Page ID");                    WhseJnlTemplate.Name := Format(WhseJnlTemplate.Type, MaxStrLen(WhseJnlTemplate.Name));                    WhseJnlTemplate.Description := StrSubstNo(Text001, WhseJnlTemplate.Type);                    WhseJnlTemplate.Insert();                    Commit();                end;            1:                WhseJnlTemplate.FindFirst();            else                JnlSelected := PAGE.RunModal(0, WhseJnlTemplate) = ACTION::LookupOK;        end;        if JnlSelected then begin            WhseJnlLine.FilterGroup := 2;            WhseJnlLine.SetRange("Journal Template Name", WhseJnlTemplate.Name);            WhseJnlLine.FilterGroup := 0;            if OpenFromBatch then begin                WhseJnlLine."Journal Template Name" := '';                PAGE.Run(WhseJnlTemplate."Page ID", WhseJnlLine);            end;        end;    end;    procedure TemplateSelectionFromBatch(var WhseJnlBatch: Record "Warehouse Journal Batch")    var        WhseJnlLine: Record "Warehouse Journal Line";        JnlSelected: Boolean;    begin        OnBeforeTemplateSelectionFromBatch(WhseJnlLine, WhseJnlBatch);        OpenFromBatch := true;        WhseJnlBatch.CalcFields("Template Type");        WhseJnlLine."Journal Batch Name" := WhseJnlBatch.Name;        WhseJnlLine."Location Code" := WhseJnlBatch."Location Code";        JnlSelected := TemplateSelection(0, WhseJnlBatch."Template Type", WhseJnlLine);    end;    procedure OpenJnl(var CurrentJnlBatchName: Code[10]; var CurrentLocationCode: Code[10]; var WhseJnlLine: Record "Warehouse Journal Line")    begin        OnBeforeOpenJnl(WhseJnlLine, CurrentJnlBatchName, CurrentLocationCode);        CheckTemplateName(          WhseJnlLine.GetRangeMax("Journal Template Name"), CurrentLocationCode, CurrentJnlBatchName);        WhseJnlLine.FilterGroup := 2;        WhseJnlLine.SetRange("Journal Batch Name", CurrentJnlBatchName);        if CurrentLocationCode <> '' then            WhseJnlLine.SetRange("Location Code", CurrentLocationCode);        WhseJnlLine.FilterGroup := 0;        OnAfterOpenJnl(WhseJnlLine, CurrentJnlBatchName, CurrentLocationCode);    end;    procedure CheckTemplateName(CurrentJnlTemplateName: Code[10]; var CurrentLocationCode: Code[10]; var CurrentJnlBatchName: Code[10])    var        WhseJnlBatch: Record "Warehouse Journal Batch";        IsHandled: Boolean;    begin        IsHandled := false;        OnBeforeCheckTemplateName(CurrentJnlTemplateName, CurrentJnlBatchName, CurrentLocationCode, IsHandled);        if IsHandled then            exit;        if FindExistingBatch(CurrentJnlTemplateName, CurrentLocationCode, CurrentJnlBatchName) then            exit;        WhseJnlBatch.Init();        WhseJnlBatch."Journal Template Name" := CurrentJnlTemplateName;        WhseJnlBatch.SetupNewBatch();        WhseJnlBatch."Location Code" := CurrentLocationCode;        WhseJnlBatch.Name := Text002;        WhseJnlBatch.Description := Text003;        WhseJnlBatch.Insert(true);        Commit();        CurrentJnlBatchName := WhseJnlBatch.Name;    end;    procedure CheckName(CurrentJnlBatchName: Code[10]; CurrentLocationCode: Code[10]; var WhseJnlLine: Record "Warehouse Journal Line")    var        WhseJnlBatch: Record "Warehouse Journal Batch";        WhseEmployee: Record "Warehouse Employee";        IsHandled: Boolean;    begin        IsHandled := false;        OnBeforeCheckName(CurrentJnlBatchName, CurrentLocationCode, IsHandled);        if IsHandled then            exit;        WhseJnlBatch.Get(          WhseJnlLine.GetRangeMax("Journal Template Name"), CurrentJnlBatchName, CurrentLocationCode);        if (UserId <> '') and not WhseEmployee.Get(UserId, CurrentLocationCode) then            Error(Text005, CurrentLocationCode, CurrentJnlBatchName, UserId);    end;    local procedure CheckQtyPhysInventory()    var        IsHandled: Boolean;    begin        IsHandled := false;        OnBeforeCheckQtyPhysInventory(Rec, IsHandled);        if IsHandled then            exit;        if "Serial No." <> '' then            if ("Qty. (Phys. Inventory)" < 0) or ("Qty. (Phys. Inventory)" > 1) then                Error(Text006, FieldCaption("Qty. (Phys. Inventory)"));    end;    local procedure CheckSerialNoTrackedQuantity()    var        IsHandled: Boolean;    begin        IsHandled := false;        OnBeforeCheckSerialNoTrackedQuantity(Rec, CurrFieldNo, IsHandled);        if IsHandled then            exit;        if (Quantity < 0) or (Quantity > 1) then            Error(Text006, FieldCaption(Quantity));    end;    procedure SetName(CurrentJnlBatchName: Code[10]; CurrentLocationCode: Code[10]; var WhseJnlLine: Record "Warehouse Journal Line")    begin        WhseJnlLine.FilterGroup := 2;        WhseJnlLine.SetRange("Journal Batch Name", CurrentJnlBatchName);        WhseJnlLine.SetRange("Location Code", CurrentLocationCode);        WhseJnlLine.FilterGroup := 0;        if WhseJnlLine.Find('-') then;        OnAfterSetName(Rec, WhseJnlLine);    end;    procedure LookupName(var CurrentJnlBatchName: Code[10]; var CurrentLocationCode: Code[10]; var WhseJnlLine: Record "Warehouse Journal Line")    var        WhseJnlBatch: Record "Warehouse Journal Batch";    begin        Commit();        WhseJnlBatch."Journal Template Name" := WhseJnlLine.GetRangeMax("Journal Template Name");        WhseJnlBatch.Name := WhseJnlLine.GetRangeMax("Journal Batch Name");        WhseJnlBatch.SetRange("Journal Template Name", WhseJnlBatch."Journal Template Name");        if PAGE.RunModal(PAGE::"Whse. Journal Batches List", WhseJnlBatch) = ACTION::LookupOK then begin            CurrentJnlBatchName := WhseJnlBatch.Name;            CurrentLocationCode := WhseJnlBatch."Location Code";            OnLookupNameOnBeforeSetName(WhseJnlLine, WhseJnlBatch);            SetName(CurrentJnlBatchName, CurrentLocationCode, WhseJnlLine);        end;    end;    procedure OpenItemTrackingLines()    var        WhseWkshLine: Record "Whse. Worksheet Line";        WhseItemTrackingLines: Page "Whse. Item Tracking Lines";    begin        OnBeforeOpenItemTrackingLines(Rec);        TestField("Item No.");        TestField("Qty. (Base)");        WhseWkshLine.Init();        WhseWkshLine."Worksheet Template Name" := "Journal Template Name";        WhseWkshLine.Name := "Journal Batch Name";        WhseWkshLine."Location Code" := "Location Code";        WhseWkshLine."Line No." := "Line No.";        WhseWkshLine."Item No." := "Item No.";        WhseWkshLine."Variant Code" := "Variant Code";        WhseWkshLine."Qty. (Base)" := "Qty. (Base)";        WhseWkshLine."Qty. to Handle (Base)" := "Qty. (Base)";        WhseWkshLine."Qty. per Unit of Measure" := "Qty. per Unit of Measure";        OnOpenItemTrackingLinesOnBeforeSetSource(WhseWkshLine, Rec);        WhseItemTrackingLines.SetSource(WhseWkshLine, Database::"Warehouse Journal Line");        WhseItemTrackingLines.RunModal();        Clear(WhseItemTrackingLines);        OnAfterOpenItemTrackingLines(Rec, WhseItemTrackingLines);    end;    procedure ItemTrackingReclass(TemplateName: Code[10]; BatchName: Code[10]; LocationCode: Code[10]; LineNo: Integer): Boolean    var        WhseItemTrkgLine: Record "Whse. Item Tracking Line";    begin        if not IsReclass(TemplateName) then            exit(false);        if ItemTrackingMgt.WhseItemTrackingLineExists(TemplateName, BatchName, LocationCode, LineNo, WhseItemTrkgLine) then begin            WhseItemTrkgLine.FindSet();            repeat                if not WhseItemTrkgLine.HasSameNewTracking() or (WhseItemTrkgLine."Expiration Date" <> WhseItemTrkgLine."New Expiration Date") then                    exit(true);            until WhseItemTrkgLine.Next() = 0;        end;        exit(false);    end;    local procedure LookupFromBinCode()    var        WhseItemTrackingSetup: Record "Item Tracking Setup";        BinCode: Code[20];        IsHandled: Boolean;    begin        IsHandled := false;        OnBeforeLookupFromBinCode(Rec, IsHandled);        if IsHandled then            exit;        if IsReclass("Journal Template Name") then begin            LookupItemTracking(WhseItemTrackingSetup);            BinCode := WMSMgt.BinContentLookUp("Location Code", "Item No.", "Variant Code", "Zone Code", WhseItemTrackingSetup, "Bin Code");        end else            BinCode := WMSMgt.BinLookUp("Location Code", "Item No.", "Variant Code", "Zone Code");        if BinCode <> '' then            Validate("From Bin Code", BinCode);    end;    local procedure LookupBinCode()    var        WhseItemTrackingSetup: Record "Item Tracking Setup";        BinCode: Code[20];        IsHandled: Boolean;    begin        IsHandled := false;        OnBeforeLookupBinCode(Rec, IsHandled);        if IsHandled then            exit;        if ("Line No." <> 0) and (Quantity < 0) then begin            LookupItemTracking(WhseItemTrackingSetup);            BinCode := WMSMgt.BinContentLookUp("Location Code", "Item No.", "Variant Code", "Zone Code", WhseItemTrackingSetup, "Bin Code");        end else            BinCode := WMSMgt.BinLookUp("Location Code", "Item No.", "Variant Code", "Zone Code");        if BinCode <> '' then            Validate("Bin Code", BinCode);    end;    procedure LookupItemTracking(var WhseItemTrackingSetup: Record "Item Tracking Setup")    var        WhseItemTrkgLine: Record "Whse. Item Tracking Line";    begin        if ItemTrackingMgt.WhseItemTrackingLineExists(             "Journal Template Name", "Journal Batch Name", "Location Code", "Line No.", WhseItemTrkgLine)        then            // Don't step in if more than one Tracking Definition exists            if WhseItemTrkgLine.Count = 1 then begin                WhseItemTrkgLine.FindFirst();                if WhseItemTrkgLine."Quantity (Base)" = "Qty. (Absolute, Base)" then                    WhseItemTrackingSetup.CopyTrackingFromWhseItemTrackingLine(WhseItemTrkgLine);            end;    end;    procedure IsReclass(CurrentJnlTemplateName: Code[10]): Boolean    var        WhseJnlTemplate: Record "Warehouse Journal Template";    begin        if WhseJnlTemplate.Get(CurrentJnlTemplateName) then            exit(WhseJnlTemplate.Type = WhseJnlTemplate.Type::Reclassification);        exit(false);    end;    procedure SetProposal(NewValue: Boolean)    begin        StockProposal := NewValue;    end;    procedure IsOpenedFromBatch(): Boolean    var        WarehouseJournalBatch: Record "Warehouse Journal Batch";        TemplateFilter: Text;        BatchFilter: Text;    begin        BatchFilter := GetFilter("Journal Batch Name");        if BatchFilter <> '' then begin            TemplateFilter := GetFilter("Journal Template Name");            if TemplateFilter <> '' then                WarehouseJournalBatch.SetFilter("Journal Template Name", TemplateFilter);            WarehouseJournalBatch.SetFilter(Name, BatchFilter);            WarehouseJournalBatch.FindFirst();        end;        exit((("Journal Batch Name" <> '') and ("Journal Template Name" = '')) or (BatchFilter <> ''));    end;    local procedure FindExistingBatch(CurrentJnlTemplateName: Code[10]; var CurrentLocationCode: Code[10]; var CurrentJnlBatchName: Code[10]): Boolean    var        WhseJnlBatch: Record "Warehouse Journal Batch";    begin        WhseJnlBatch.SetRange("Journal Template Name", CurrentJnlTemplateName);        WhseJnlBatch.SetRange(Name, CurrentJnlBatchName);        if IsWarehouseEmployeeLocationDirectPutAwayAndPick(CurrentLocationCode) then begin            WhseJnlBatch.SetRange("Location Code", CurrentLocationCode);            if not WhseJnlBatch.IsEmpty() then                exit(true);        end;        WhseJnlBatch.SetRange(Name);        CurrentLocationCode := WMSMgt.GetDefaultDirectedPutawayAndPickLocation();        WhseJnlBatch.SetRange("Location Code", CurrentLocationCode);        if WhseJnlBatch.FindFirst() then begin            CurrentJnlBatchName := WhseJnlBatch.Name;            exit(true);        end;        WhseJnlBatch.SetRange("Location Code");        if WhseJnlBatch.FindSet() then            repeat                if IsWarehouseEmployeeLocationDirectPutAwayAndPick(WhseJnlBatch."Location Code") then begin                    CurrentLocationCode := WhseJnlBatch."Location Code";                    CurrentJnlBatchName := WhseJnlBatch.Name;                    exit(true);                end;            until WhseJnlBatch.Next() = 0;        exit(false);    end;    local procedure IsWarehouseEmployeeLocationDirectPutAwayAndPick(LocationCode: Code[10]): Boolean    var        Location: Record Location;        WarehouseEmployee: Record "Warehouse Employee";    begin        if Location.Get(LocationCode) and Location."Directed Put-away and Pick" then            exit(WarehouseEmployee.Get(UserId, Location.Code));        exit(false);    end;    procedure CheckTrackingIfRequired(WhseItemTrackingSetup: Record "Item Tracking Setup")    begin        if WhseItemTrackingSetup."Serial No. Required" then            TestField("Serial No.");        if WhseItemTrackingSetup."Lot No. Required" then            TestField("Lot No.");        OnAfterCheckTrackingIfRequired(Rec, WhseItemTrackingSetup);    end;    procedure CopyTrackingFromItemLedgEntry(ItemLedgEntry: Record "Item Ledger Entry")    begin        "Serial No." := ItemLedgEntry."Serial No.";        "Lot No." := ItemLedgEntry."Lot No.";        OnAfterCopyTrackingFromItemLedgEntry(Rec, ItemLedgEntry);    end;    procedure CopyTrackingFromItemTrackingSetupIfRequired(WhseItemTrackingSetup: Record "Item Tracking Setup")    begin        if WhseItemTrackingSetup."Serial No. Required" then            "Serial No." := WhseItemTrackingSetup."Serial No.";        if WhseItemTrackingSetup."Lot No. Required" then            "Lot No." := WhseItemTrackingSetup."Lot No.";        OnAfterCopyTrackingFromItemTrackingSetupIfRequired(Rec, WhseItemTrackingSetup);    end;    procedure CopyNewTrackingFromItemTrackingSetupIfRequired(WhseItemTrackingSetup: Record "Item Tracking Setup")    begin        if WhseItemTrackingSetup."Serial No. Required" then            "New Serial No." := WhseItemTrackingSetup."Serial No.";        if WhseItemTrackingSetup."Lot No. Required" then            "New Lot No." := WhseItemTrackingSetup."Lot No.";        OnAfterCopyNewTrackingFromItemTrackingSetupIfRequired(Rec, WhseItemTrackingSetup);    end;    procedure CopyTrackingFromWhseActivityLine(WhseActivityLine: Record "Warehouse Activity Line")    begin        "Serial No." := WhseActivityLine."Serial No.";        "Lot No." := WhseActivityLine."Lot No.";        OnAfterCopyTrackingFromWhseActivityLine(Rec, WhseActivityLine);    end;    procedure CopyTrackingFromWhseEntry(WhseEntry: Record "Warehouse Entry")    begin        "Serial No." := WhseEntry."Serial No.";        "Lot No." := WhseEntry."Lot No.";        OnAfterCopyTrackingFromWhseEntry(Rec, WhseEntry);    end;    procedure IsQtyPhysInventoryBaseEditable() IsEditable: Boolean    begin        IsEditable := false;        OnAfterIsFieldEditable(Rec, FieldNo("Qty. (Phys. Inventory) (Base)"), IsEditable);    end;    procedure SetSource(SourceType: Integer; SourceSubtype: Integer; SourceNo: Code[20]; SourceLineNo: Integer; SourceSublineNo: Integer)    begin        "Source Type" := SourceType;        if SourceSubtype >= 0 then            "Source Subtype" := SourceSubtype;        "Source No." := SourceNo;        "Source Line No." := SourceLineNo;        if SourceSublineNo >= 0 then            "Source Subline No." := SourceSublineNo;    end;    procedure SetTrackingFilterFromBinContent(var BinContent: Record "Bin Content")    begin        SetFilter("Serial No.", BinContent.GetFilter("Serial No. Filter"));        SetFilter("Lot No.", BinContent.GetFilter("Lot No. Filter"));        OnAfterSetTrackingFilterFromBinContent(Rec, BinContent);    end;    procedure SetWhseDocument(DocType: Enum "Warehouse Journal Document Type"; DocNo: Code[20]; DocLineNo: Integer)    begin        "Whse. Document Type" := DocType;        "Whse. Document No." := DocNo;        "Whse. Document Line No." := DocLineNo;    end;    procedure InitExpirationDate()    var        WhseEntry: Record "Warehouse Entry";        ItemTrackingSetup: Record "Item Tracking Setup";        ExpDate: Date;        EntriesExist: Boolean;    begin        if ("Location Code" = '') or ("Item No." = '') then            exit;        "Expiration Date" := 0D;        if CopyTrackingFromWhseEntryToItemTrackingSetup(WhseEntry, ItemTrackingSetup) then begin            ExpDate := ItemTrackingMgt.ExistingExpirationDate(WhseJnlLine."Item No.", WhseJnlLine."Variant Code", ItemTrackingSetup, false, EntriesExist);            if EntriesExist then                "Expiration Date" := ExpDate            else                "Expiration Date" := WhseEntry."Expiration Date";        end    end;    local procedure CheckLotNoTrackedExpirationDate()    begin        if CheckExpirationDateExists() then            Error(ItemTrackedItemErr, FieldCaption("Expiration Date"));    end;    procedure CheckExpirationDateExists(): Boolean    var        ItemTrackingSetup: Record "Item Tracking Setup";        WhseEntry: Record "Warehouse Entry";        Location2: Record Location;        ExpDate: Date;    begin        if ("Location Code" = '') or ("Item No." = '') then            exit;        if CopyTrackingFromWhseEntryToItemTrackingSetup(WhseEntry, ItemTrackingSetup) then begin            Location2.Get("Location Code");            if ItemTrackingMgt.GetWhseExpirationDate("Item No.", "Variant Code", Location2, ItemTrackingSetup, ExpDate) then                exit(true);        end;    end;    local procedure CopyTrackingFromWhseEntryToItemTrackingSetup(var WhseEntry: Record "Warehouse Entry"; var ItemTrackingSetup: Record "Item Tracking Setup"): Boolean    begin        if not GetWhseEntry(WhseEntry) then            exit(false);        if CheckItemTrackingEnabled("Item No.") then            WhseEntry.SetTrackingFilterFromWhseEntryForSerialOrLotTrackedItem(WhseEntry)        else            WhseEntry.SetTrackingFilterFromWhseEntry(WhseEntry);        if CheckWhseTrackings(WhseEntry) then begin            ItemTrackingSetup.CopyTrackingFromWhseEntry(WhseEntry);            exit(true);        end;    end;    local procedure GetWhseEntry(var WhseEntry: Record "Warehouse Entry"): Boolean    begin        WhseEntry.SetCurrentKey("Item No.", "Bin Code", "Location Code", "Variant Code", "Unit of Measure Code", "Lot No.", "Serial No.", "Package No.");        WhseEntry.SetRange("Item No.", "Item No.");        WhseEntry.SetRange("Bin Code", "Bin Code");        WhseEntry.SetRange("Location Code", "Location Code");        WhseEntry.SetRange("Variant Code", "Variant Code");        WhseEntry.SetRange("Unit of Measure Code", "Unit of Measure Code");        exit(WhseEntry.FindFirst());    end;    local procedure CheckWhseTrackings(WhseEntry: Record "Warehouse Entry"): Boolean    begin        if (Rec."Lot No." <> '') and (Rec."Lot No." = WhseEntry."Lot No.") then            exit(true);        if (Rec."Serial No." <> '') and (Rec."Serial No." = WhseEntry."Serial No.") then            exit(true);        if (Rec."Package No." <> '') and (Rec."Package No." = WhseEntry."Package No.") then            exit(true);    end;    local procedure CheckItemTrackingEnabled(ItemNo: Code[20]): Boolean    var        PhysInvTrackingMgt: Codeunit "Phys. Invt. Tracking Mgt.";    begin        Item.Get(ItemNo);        if PhysInvTrackingMgt.GetTrackingNosFromWhse(Item) then            exit(true);    end;    local procedure DeleteWhseItemTracking()    begin        ItemTrackingMgt.DeleteWhseItemTrkgLines(          Database::"Warehouse Journal Line", 0, "Journal Batch Name", "Journal Template Name", 0, "Line No.", "Location Code", true);    end;    [IntegrationEvent(false, false)]    local procedure OnAfterCheckTrackingIfRequired(var WhseJnlLine: Record "Warehouse Journal Line"; WhseItemTrackingSetup: Record "Item Tracking Setup")    begin    end;    [IntegrationEvent(false, false)]    local procedure OnAfterCopyTrackingFromItemLedgEntry(var WhseJnlLine: Record "Warehouse Journal Line"; ItemLedgEntry: Record "Item Ledger Entry")    begin    end;    [IntegrationEvent(false, false)]    local procedure OnAfterCopyTrackingFromItemTrackingSetupIfRequired(var WhseJnlLine: Record "Warehouse Journal Line"; WhseItemTrackingSetup: Record "Item Tracking Setup")    begin    end;    [IntegrationEvent(false, false)]    local procedure OnAfterCopyNewTrackingFromItemTrackingSetupIfRequired(var WhseJnlLine: Record "Warehouse Journal Line"; WhseItemTrackingSetup: Record "Item Tracking Setup")    begin    end;    [IntegrationEvent(false, false)]    local procedure OnAfterCopyTrackingFromWhseActivityLine(var WarehouseJournalLine: Record "Warehouse Journal Line"; WarehouseActivityLine: Record "Warehouse Activity Line")    begin    end;    [IntegrationEvent(false, false)]    local procedure OnAfterCopyTrackingFromWhseEntry(var WarehouseJournalLine: Record "Warehouse Journal Line"; WarehouseEntry: Record "Warehouse Entry")    begin    end;    [IntegrationEvent(false, false)]    local procedure OnAfterOpenItemTrackingLines(var WarehouseJournalLine: Record "Warehouse Journal Line"; var WhseItemTrackingLines: Page "Whse. Item Tracking Lines")    begin    end;    [IntegrationEvent(false, false)]    local procedure OnAfterOpenJnl(var WarehouseJournalLine: Record "Warehouse Journal Line"; CurrentJnlBatchName: Code[10]; CurrentLocationCode: Code[10])    begin    end;    [IntegrationEvent(false, false)]    local procedure OnAfterSetupNewLine(var WarehouseJournalLine: Record "Warehouse Journal Line"; var LastWhseJnlLine: Record "Warehouse Journal Line"; WarehouseJournalTemplate: Record "Warehouse Journal Template");    begin    end;    [IntegrationEvent(false, false)]    local procedure OnAfterSetName(var RecWarehouseJournalLine: Record "Warehouse Journal Line"; var WarehouseJournalLine: Record "Warehouse Journal Line")    begin    end;    [IntegrationEvent(false, false)]    local procedure OnAfterSetTrackingFilterFromBinContent(var WarehouseJournalLine: Record "Warehouse Journal Line"; var BinContent: Record "Bin Content")    begin    end;    [IntegrationEvent(false, false)]    local procedure OnBeforeCheckBin(var WarehouseJournalLine: Record "Warehouse Journal Line"; LocationCode: Code[10]; BinCode: Code[20]; Inbound: Boolean; var IsHandled: Boolean; CurrentFieldNo: Integer)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnBeforeCheckIncreaseBin(WarehouseJournalLine: Record "Warehouse Journal Line"; BinCode: Code[20]; StockProposal: Boolean; var IsHandled: Boolean)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnBeforeCheckName(var JnlBatchName: Code[10]; var LocationCode: Code[10]; var IsHandled: Boolean)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnBeforeCheckQtyPhysInventory(var WarehouseJournalLine: Record "Warehouse Journal Line"; var IsHandled: Boolean)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnBeforeCheckSerialNoTrackedQuantity(var WarehouseJournalLine: Record "Warehouse Journal Line"; CurrentFieldNo: Integer; var IsHandled: Boolean)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnBeforeCheckTemplateName(var JnlTemplateName: Code[10]; var JnlBatchName: Code[10]; var LocationCode: Code[10]; var IsHandled: Boolean)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnBeforeGetLocation(var Location: Record Location; LocationCode: Code[10]; var IsHandled: Boolean)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnBeforeGetWhseJnlBatch(var WarehouseJournalLine: Record "Warehouse Journal Line"; var WhseJnlBatch: Record "Warehouse Journal Batch"; var IsHandled: Boolean)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnBeforeLookupBinCode(var WarehouseJournalLine: Record "Warehouse Journal Line"; var IsHandled: Boolean)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnBeforeLookupFromBinCode(var WarehouseJournalLine: Record "Warehouse Journal Line"; var IsHandled: Boolean)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnBeforeOpenItemTrackingLines(var WarehouseJournalLine: Record "Warehouse Journal Line")    begin    end;    [IntegrationEvent(false, false)]    local procedure OnBeforeOpenJnl(var WarehouseJournalLine: Record "Warehouse Journal Line"; var CurrentJnlBatchName: Code[10]; CurrentLocationCode: Code[10])    begin    end;    [IntegrationEvent(false, false)]    local procedure OnBeforeSetItemFields(var WarehouseJournalLine: Record "Warehouse Journal Line"; var IsHandled: Boolean; xWarehouseJournalLine: Record "Warehouse Journal Line"; Item: Record Item)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnBeforeTemplateSelectionFromBatch(var WarehouseJournalLine: Record "Warehouse Journal Line"; WarehouseJournalBatch: Record "Warehouse Journal Batch")    begin    end;    [IntegrationEvent(false, false)]    local procedure OnBeforeValidateQtyBase(var WarehouseJournalLine: Record "Warehouse Journal Line"; xWarehouseJournalLine: Record "Warehouse Journal Line"; CallingFieldNo: Integer; var IsHandled: Boolean)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnCheckBinOnBeforeCheckOutboundBin(var WarehouseJournalLine: Record "Warehouse Journal Line"; var IsHandled: Boolean)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnLookupNameOnBeforeSetName(var WarehouseJournalLine: Record "Warehouse Journal Line"; WhseJnlBatch: Record "Warehouse Journal Batch")    begin    end;    [IntegrationEvent(false, false)]    local procedure OnOpenItemTrackingLinesOnBeforeSetSource(var WhseWorksheetLine: Record "Whse. Worksheet Line"; WarehouseJournalLine: Record "Warehouse Journal Line")    begin    end;    [IntegrationEvent(false, false)]    local procedure OnSetUpNewLineOnAfterWhseJnlLineSetFilters(var RecWarehouseJournalLine: Record "Warehouse Journal Line"; WarehouseJournalLine: Record "Warehouse Journal Line"; LastWarehouseJournalLine: Record "Warehouse Journal Line")    begin    end;    [IntegrationEvent(false, false)]    local procedure OnTemplateSelectionOnAfterSetFilters(var WarehouseJournalLine: Record "Warehouse Journal Line"; var WhseJnlTemplate: Record "Warehouse Journal Template"; OpenFromBatch: Boolean)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnValidateQuantityOnAfterCalcBaseQty(var WarehouseJournalLine: Record "Warehouse Journal Line"; xWarehouseJournalLine: Record "Warehouse Journal Line")    begin    end;    [IntegrationEvent(false, false)]    local procedure OnValidateUnitOfMeasureCodeOnBeforeValidateQuantity(var WarehouseJournalLine: Record "Warehouse Journal Line"; var IsHandled: Boolean)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnValidateToBinCodeOnBeforeSetToZoneCode(var WarehouseJournalLine: Record "Warehouse Journal Line"; var Bin: Record Bin)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnAfterIsFieldEditable(var WarehouseJournalLine: Record "Warehouse Journal Line"; FieldId: Integer; var IsEditable: Boolean)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnAfterValidateQtyPhysInventoryBase(var WarehouseJournalLine: Record "Warehouse Journal Line"; PhysInvtEntered: Boolean)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnBeforeCalcBaseQty(var WarehouseJournalLine: Record "Warehouse Journal Line"; var Qty: Decimal; FromFieldName: Text; ToFieldName: Text)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnValidateQuantityOnBeforeGetWhseJnlTemplate(var WarehouseJournalLine: Record "Warehouse Journal Line"; var IsHandled: Boolean)    begin    end;    [IntegrationEvent(false, false)]    local procedure OnBeforeGetBinType(LocationCode: Code[10]; BinCode: Code[20]; var BinTypeCode: Code[10]; var IsHandled: Boolean)    begin    end;}